Superior Dust Containment:
Zip-pole walls and heavy sheeting seal the work zone, and HVAC returns are covered so dust stays out of ducts and furniture.

A remodel only goes smoothly when the old finishes come out cleanly. Long Beach Demolition Co handles interior demolition for homes, condos and commercial suites: cabinets, tile, flooring, drywall and non-structural partitions removed with containment, dust control and protection for everything that stays. In buildings with management rules, we plan around elevator reservations, loading windows and quiet hours.
It depends on scope. Removing non-structural finishes is treated differently from removing walls, plumbing or electrical, and structural changes need engineering and a permit. Confirm what applies to your project with Long Beach Development Services before work begins.
SCAQMD Rule 1403 applies to renovation as well as demolition, and it calls for an asbestos survey before work that disturbs building materials. Notification depends on the amount of regulated material involved. Check the current thresholds and forms with SCAQMD.
Yes, with the building's rules in hand. Share the contractor requirements early so we can plan around insurance certificates, freight elevator reservations, loading windows and quiet hours, and so we can protect hallways and common areas.
We seal off the work zone with sheeting, protect the path out, wet material where it makes sense and clean at the end of each day. Where the scope calls for it we add negative air and HEPA filtration. Tell us who stays on site so we can plan accordingly.
We stop work in the affected area, and the owner or contractor arranges testing and, if needed, abatement by a properly certified firm. Then we resume under a revised plan. Surveys before the job reduce the odds of an interruption.
Only with an engineer's specification and the required permit. We can open a section to help identify what is inside, but we do not remove a suspected bearing wall without that sign-off.
We include the haul-off in the estimate, sorted so recyclable material can go where it is accepted and count toward the city's diversion requirements. In towers and condos we also cover the route out of the building.
An interior gut-out leaves the shell standing and removes what is inside it: finishes, fixtures, cabinets, flooring and, where allowed, partitions. In Long Beach that can mean stripping a Craftsman bungalow back to studs, emptying a 1960s stucco-house kitchen, or clearing a tenant floor in a downtown high-rise where the building sets your hours.
The goal is a space your contractor can build in without surprises behind the drywall.
SCAQMD Rule 1403 does not apply only to full teardowns. It also covers renovation, and it calls for an asbestos survey before work that disturbs building materials. Notification requirements for renovation depend on the quantity of regulated asbestos-containing material involved, and the details change, so confirm current thresholds, forms and fees with SCAQMD. If testing finds asbestos, abatement is done by a separately certified contractor before demolition continues.
We build the survey into the first conversation rather than the last, because a positive result changes the scope, the sequence and sometimes the budget.
Downtown Long Beach has a steady flow of office and residential towers, and tenant floors get gutted for new layouts regularly. Those jobs run on the building's rules as much as on the work itself: certificate of insurance requirements, elevator reservations or a freight elevator schedule, dock and loading windows, restricted noisy hours, and floor and corridor protection.
We ask for the building's contractor rules at the start, schedule noisy tasks inside the allowed windows, and bag and cart debris so hallways, lobbies and neighboring suites stay clean. Interior work in some buildings also needs a permit or an approved plan, so confirm what the city and building management require before you set a date.
For houses, the biggest variables are what is load-bearing and what is hiding in the walls. We remove non-structural finishes first, then open walls carefully and stop to loop in your engineer or contractor if we find something that was not on the plan. Taking out a load-bearing wall needs an engineer's specification and a permit, so confirm both before we begin.
For condos and townhomes, the association usually has its own rules: approved work hours, flooring sound-insulation requirements, haul routes and protection of common areas. Send us the HOA or building rules with your request so the schedule and estimate account for them.
Photos or a floor plan, the age of the building, what is staying, what the finished space should look like for the next trade, and any building or HOA rules. If you already have a survey or test results, send them along.
Interior demolition across Long Beach: Downtown Long Beach, Bixby Knolls & Uptown, North Long Beach, residential demolition and commercial demolition. Call (562) 210-0343 or use the contact form below for a written estimate.

A clean starting point for your contractor: strip-outs, gutting and flooring removal planned around building rules and Rule 1403.Whether it is a 1920s bungalow, a stucco house from the 1960s, a condo or a downtown suite, the goal is a clean, documented starting point so your contractor can begin without surprises.
Kitchens and baths hide the most plumbing, wiring and old finishes, so they get the most careful tear-out.
Cabinets and counters come out without harming the walls or plumbing you plan to keep.
Wall and floor tile removed, with mastic and backer board tested first if the room is old.
Tubs, toilets, vanities and appliances hauled away, with metal and porcelain sorted for recycling.

Opening up a bungalow floor plan or reworking a tenant suite? We handle the removal side.
Non-structural partitions removed; anything suspected to be load-bearing waits for an engineer's direction.
Damaged plaster, drywall and ceilings taken to the studs, with dust contained.
Old closets, built-ins and soffits removed and the openings made ready for framers.

Floors come up to the subfloor, with a pause for testing when the layers are old or unknown.
Hardwood and laminate lifted, with nails and staples pulled.
Tile, stone and thin-set removed with tools that limit damage to the subfloor.
Carpet, pad and tack strips removed, leaving a flat surface for the next install.

Interior work happens in rooms people live and work in, so Long Beach Demolition Co follows a set protocol for containment, protection and cleanup:
Zip-pole walls and heavy sheeting seal the work zone, and HVAC returns are covered so dust stays out of ducts and furniture.
Protective runners cover the route from the entry, stairwell or elevator to the work area, so finished floors stay unmarked.
Debris moves out in smaller, bagged or carted loads along one planned path, which matters in condos, towers and small bungalows alike.
Before handoff the area is vacuumed and wiped, and checked for stray nails and splinters.

Working inside someone's home or suite takes clear communication. A supervisor reviews the plan with you before demolition starts, checks in during the work, and walks the space with you at the end, so changes and surprises are handled in conversation instead of after the fact.
We treat your kitchen like it's ours. Our goal is to make the demolition the easiest part of your entire remodel.

Send us the address, the rooms involved and any building or HOA rules. Long Beach Demolition Co will follow up with a walk-through and a written interior demolition estimate.